Search Catalog
      GO   
 All Categories    SPHC Series, Standard Force Sensing Clevis Pins
All Categories > Force Sensing Clevis Pins & Bolts > SPHC Series, Standard Force Sensing Clevis Pins > View Items 
    Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

SPHC Series, Standard Force Sensing Clevis Pins

 width= 
Check up to five results to perform an action.
 width=


For Hydraulic Cylinder

Features of Strainsert Load Sensing Clevis Pins

  • Easy Installation:By replacing pins in hydraulic cylinders with minimum alterations using custom keeper plates.
  • Precise Load Sensing:Complete strain gage bridge circuit bonded and sealed inside small hole along longitudinal axis of Pin, by exclusive Strainsert process.
  • Rugged:Due to self protecting nature of strain gage installation sealed in small hole. Proven immune to harsh environment.
  • Accuracy:Strainsert Load Sensing Clevis Pins have combined error due to repeatability and non-linearity of less than 1% of rated load typically.

    Custom Pin design performance and specification may vary with design requirements.

    Note: All Load Pins can be fit with a permanently attached cable


    		•
    SPHC Series, Standard Force Sensing Clevis Pins

    larger image     		sphcdim

    larger image


    Request InformationCompare Items   Results Per Page : 
      Results 1 - 11 of 11 1 

    Item #

    Dp - Nominal Pin Diameter

    Connector Type

    Load Angle Relative to Base Bracket

    Cylinder Bore Diameter

    L - Overall Length of Pin

    Load Capacity

    CAD

    SPHC-.5 X O (SS) 0.500 in Axial Connector 0° (Standard)
    Customer Defined (±Alpha)     		1-1/2 Inch 4.63 in 3500 lb CAD Files
    SPHC-.75 X O (SS) 0.750 in Axial Connector 0° (Standard)
    Customer Defined (±Alpha)     		2 Inch
    2-1/2 Inch     		5.19 in 6000 lb CAD Files
    SPHC-1 X O (SS) 1.000 in Axial Connector 0° (Standard)
    Customer Defined (±Alpha)     		3-1/4 Inch 5.69 in 16500 lb CAD Files
    SPHC-1.375 X O (SS) 1.375 in Axial Connector 0° (Standard)
    Customer Defined (±Alpha)     		4 Inch 6.88 in 25000 lb CAD Files
    SPHC-1.75 X O (SS) 1.750 in Axial Connector 0° (Standard)
    Customer Defined (±Alpha)     		5 Inch 7.94 in 39000 lb CAD Files
    SPHC-2 X O (SS) 2.000 in Axial Connector 0° (Standard)
    Customer Defined (±Alpha)     		6 Inch 7.94 in 56000 lb CAD Files
    SPHC-2.5 X O (SS) 2.500 in Axial Connector 0° (Standard)
    Customer Defined (±Alpha)     		7 Inch 9.00 in 77000 lb CAD Files
    SPHC-3 X O (SS) 3.000 in Axial Connector 0° (Standard)
    Customer Defined (±Alpha)     		8 Inch 9.00 in 100000 lb CAD Files
    SPHC-3.5 X O (SS) 3.500 in Axial Connector 0° (Standard)
    Customer Defined (±Alpha)     		10 Inch 11.25 in 157000 lb CAD Files
    SPHC-4 X O (SS) 4.000 in Axial Connector 0° (Standard)
    Customer Defined (±Alpha)     		12 Inch 12.50 in 226000 lb CAD Files
    SPHC-5 X O (SS) 5.000 in Axial Connector 0° (Standard)
    Customer Defined (±Alpha)     		14 Inch 15.50 in 300000 lb CAD Files
      Results 1 - 11 of 11 1