| Items |
 TLS-1 AL TLS - External Threads both Ends |
TLS-2 AL TLS - External Threads both Ends |
TLS-3 AL TLS - External Threads both Ends |
TLS-4 AL TLS - External Threads both Ends |
TLS-5 AL TLS - External Threads both Ends |
|||||
| Load Capacity | 1 KIPS | 2 KIPS | 3 KIPS | 4 KIPS | 5 KIPS | |||||
| Overload without Zero Shift | 150% | |||||||||
| Bridge | Full bridge 350 Ohm (Nominal) | |||||||||
| Excitation | 12 V AC (Maximum) 12 V DC (Maximum) | |||||||||
| Output Signal1 | 2-mV/V (Nominal) 2-mV/V (Standardized Output) | |||||||||
| Non-Repeatability | 0.10% FS | |||||||||
| Non-Linearity | 0.25% FS | |||||||||
| Hysteresis | ±0.15% FS | |||||||||
| Temp Effects (on Zero) | 0.003% FS / °F (Nominal) | |||||||||
| Temp Effects (on Output) | 0.003% load / °F (Nominal) | |||||||||
| Zero Balance2 | ±2% FS (Nominal) | |||||||||
| Electrical Connection | Receptacle or built-in cable | |||||||||
| Static Overload | 150% without zero or open shift | |||||||||
| Material | Aluminum Alloy 7075-T6, Hard Coat Finish: Rockwell C-60 | |||||||||
| Connector Type | Connector Permanently Attached Cable | |||||||||
| AS - Length | 1-3/8 in | |||||||||
| AN - Length | ||||||||||
| B - Width | 1-1/2 in | |||||||||
| C - Diameter | 2 in | |||||||||
| CC - Diameter | ||||||||||
| D - Diameter | 0.475 in | 0.545 in | 0.608 in | 0.665 in | 0.718 in | |||||
| E - Length | 1-1/2 in | |||||||||
| F - Length | 5/8 in | |||||||||
| G - Length | 1-3/4 in | |||||||||
| L - Overall Length | 6-5/8 in | |||||||||
| R - Radius | 1/2 in | 1/2 in | 1/2 in | 7/16 in | 7/16 in | |||||
| T - Thread Size | 7/8-14NF | |||||||||
| Weight | 0.6 lb | |||||||||
| Safety Factor | 4.4 | |||||||||
|
||||||||||
