Fatigue Rated Load Cells can be used for either Completely Reversed (C/R) or Uni-Directional (U/D) force measurements. 

Our Fatigue Rated Load Cells possess very low deflection, high natural frequencies, and up to a One Billion cycle lifetime!

Measurement ranges:
C/R: ±1.2 to ±180 KIPS. Both Tenion and Compression.
U/D: 1.8 to 270 KIPS. Either Tension or Compression.

Model FFL(15/+10)U(C)-(3/+2)SPKT shown
Search by Specification
Unit of Measure
Items
Fatigue Rated Universal Load Cell

Fatigue Rated Universal Load Cells
Fatigue Rated Universal Load Cell

Fatigue Rated Universal Load Cells
Fatigue Rated Universal Load Cell

Fatigue Rated Universal Load Cells
Fatigue Rated Universal Load Cell

Fatigue Rated Universal Load Cells
Fatigue Rated Universal Load Cell

Fatigue Rated Universal Load Cells
Load Capacity1 N/A ±1.2, C/R KIPS1.8, U/D KIPS N/A ±3, C/R KIPS4.5, U/D KIPS N/A ±5, C/R KIPS7.5, U/D KIPS N/A ±10, C/R KIPS15, U/D KIPS N/A ±15, C/R KIPS22-1/2, U/D KIPS
Type of Flat Load Cells N/A Fatigue Rated
Rated Output N/A 2-mV/V C/R (Nominal) 2-mV/V C/R (Std. Output) 3-mV/V U/D (Nominal) 3-mV/V U/D (Std. Output)
Configuration N/A Dual Bridge Single Bridge
Non-Linearity N/A General Purpose ±0.25% F.S. Precision ±0.10% F.S.
Connector Type N/A Connector Permanently Attached Cable
Hole Type N/A Threaded Loading Hole Thru Hole
A - Diameter N/A 11/16 in N/A 11/16 in N/A 1-1/16 in N/A 1-5/8 in N/A 1-15/16 in
B - Diameter N/A 1-7/16 in N/A 1-11/16 in N/A 1-13/16 in N/A 2-7/8 in N/A 3-7/16 in
C - Diameter N/A 2-1/2 in N/A 3-3/16 in N/A 3-3/16 in N/A 4-7/8 in N/A 5-7/8 in
D - Diameter N/A 2-11/16 in N/A 3-7/16 in N/A 3-7/16 in N/A 5-1/8 in N/A 6-1/8 in
E - Length N/A 3-23/32 in N/A 4-15/32 in N/A 4-15/32 in N/A 6-7/16 in N/A 7-7/16 in
F - Height N/A 15/16 in N/A 15/16 in N/A 15/16 in N/A 1-3/8 in N/A 1-1/2 in
G - Width N/A 2-13/16 in N/A 2-15/16 in N/A 2-15/16 in N/A 3-3/4 in N/A 3-3/4 in
H - Height N/A 1 in N/A 1 in N/A 1 in N/A 1-1/2 in N/A 1-5/8 in
K - Outside Diameter N/A 11/32 in N/A 13/32 in N/A 13/32 in N/A 19/32 in N/A 11/16 in
k - Inside Diameter N/A 7/32 in N/A 9/32 in N/A 9/32 in N/A 13/32 in N/A 15/32 in
Number of Hold Down Bolt Holes N/A 8
L - Diameter N/A 1-15/16 in N/A 2-7/16 in N/A 2-7/16 in N/A 3-3/4 in N/A 4-1/2 in
M - Length N/A 1/32 in N/A 1/32 in N/A 1/32 in N/A 1/16 in N/A 1/16 in
N - Depth of Hole N/A 5/16 in N/A 3/8 in N/A 3/8 in N/A 1/2 in N/A 1/2 in
T - Hole N/A 3/8-16UNC-2B Thru Hole, 13/32" N/A 7/16-20UNF-2B Thru Hole, 15/32" N/A 5/8-18UNF-2B Thru Hole, 21/32" N/A 1-14UNF-2B Thru Hole, 1-1/32" N/A 1-1/4-12N-2B Thru Hole, 1-1/4"
Lifting Holes - Threads N/A NONE
Lifting Holes - BC. Diameter2 N/A NONE
Basic Model N/A FL2.5U-2 N/A FL10U-2(Mod) N/A FL10U-2 N/A FL25U-2 N/A FL35U-2
Weight N/A 0.6 lb N/A 1.7 lb N/A 1.7 lb N/A 5.9 lb N/A 9.4 lb
Fatique Life N/A One Billion (109) Cycles
Bridge Resistance N/A 350 Ohms (Nominal)
Excitation Voltage N/A 15V AC or DC (Maximum)
Compensated Range N/A 60 to 150 ºF
Temperature Effect on Bridge Balance N/A ±0.0035% FS/°F
Temperature Effect on Output Signal N/A ±0.0030% Load/°F (Nominal)
Non-Repeatability N/A ±0.05% FS
Non-Linearity  N/A ±0.25% FS
Hysteresis N/A ±0.15% FS
Bridge Balance N/A ±2% FS
Insulation Resistance N/A 10,000 Megaohms (Minimum)
Receptacle N/A PT02H-10-6P
Mating Plug N/A PT06A-10-6S (SR)
     Function N/A Pin
     (+) Excitation N/A A
     (-) Excitation N/A D
     (+) Signal N/A B
     (-) Signal N/A C
Cable N/A #20(26x34) AWG., rubber insulation, shielded, rubber jacket, 4-Conductor (Standard Cable)
     Function  N/A Wire Code
     (+) Excitation  N/A Red
     (-) Excitation  N/A Black
     (+) Signal  N/A Green
     (-) Signal  N/A White
  • 1 U/D: Uni-directional load rating, from zero to maximum specified. C/R: Completely reversed load rating, plus and minus specified.
  • 2 Bolt Circle Diameter