Specifications
Dimensional Drawing |
N/A
 Tension Link Pivot  |
Load Capacity |
N/A 3 KIPS |
Material |
N/A Aluminum Alloy 7075-T6, Hard Coat Finish: Rockwell C-60 |
Connector Type |
N/A Connector Permanently Attached Cable |
A - Length |
N/A 7/8 in |
B - Width |
N/A 1-7/16 in |
C - Diameter |
N/A 2 in |
D - Diameter |
N/A 0.608 in |
E - Length |
N/A 2-9/16 in |
F - Length |
N/A 3/8 in |
G - Length |
N/A 2-5/16 in |
L - Overall Length |
N/A 7 in |
M - Length |
N/A 5-1/4 in |
R - Radius |
N/A 1/2 in |
T - Diameter |
N/A 5/8 in |
Weight |
N/A 1.3 lb |
Safety Factor |
N/A 4.5 |
Performance Specs
Overload without Zero Shift |
N/A 150% |
Bridge |
N/A Full bridge 350 Ohm (Nominal) |
Excitation |
N/A 12 V AC (Maximum) 12 V DC (Maximum) |
| Output Signal1 | N/A 2-mV/V (Nominal) 2-mV/V (Standardized Output) |
Non-Repeatability |
N/A 0.10% FS |
Non-Linearity |
N/A 0.25% FS |
Hysteresis |
N/A ±0.15% FS |
Temp Effects (on Zero) |
N/A 0.003% FS / °F (Nominal) |
Temp Effects (on Output) |
N/A 0.003% load / °F (Nominal) |
| Zero Balance2 | N/A ±2% FS (Nominal) |
Static Overload |
N/A 150% without zero or open shift |
Electrical Specifications
Receptacle |
N/A PT02H-10-6P |
Mating Plug |
N/A PT06A-10-6S (SR) |
Function |
N/A Pin |
(+) Excitation |
N/A A |
(-) Excitation |
N/A D |
(+) Signal |
N/A B |
(-) Signal |
N/A C |
Cable |
N/A #20(26x34) AWG., rubber insulation, shielded, rubber jacket, 4-Conductor (Standard Cable) |
Function |
N/A Wire Code |
(+) Excitation |
N/A Red |
(-) Excitation |
N/A Black |
(+) Signal |
N/A Green |
(-) Signal |
N/A White |
General Information
|
Strainsert Tension Links are superior performance sensors, for use in weighing and force measuring applications. |
- 1 Exact output provided with calibration data. (Standardized outputs are optional).
- 2 Prior to loading, it is necessary to initially/periodically null the zero load output to account for any residual offset.
