Unit of Measure

Features

N/A All Load Cells are available in Dual Bridge Configurations
All Load Cells can be fit with a permanently attached cable
All Load Cells are available with bored thru holes

Model FFL(15/+10)U(C)-(3/+2)SPKT shown

Dimensional Drawing

Dimensional Drawing

N/A
Fatigue Rated Load Cell
a1044.jpg

Specifications

Load Capacity1 N/A ±3 KIPS4.5 KIPS

Type of Flat Load Cells

N/A Universal

Rated Output

N/A 3-mv/V U/D(Nominal Output)

Configuration

N/A Single Bridge

Non-Linearity

N/A General Purpose 0.25% F.S.

Connector Type

N/A Connector

Hole Type

N/A Threaded Loading Hole

A - Diameter

N/A 11/16 in

B - Diameter

N/A 1-11/16 in

C - Diameter

N/A 3-3/16 in

D - Diameter

N/A 3-7/16 in

E - Length

N/A 4-15/32 in

F - Height

N/A 15/16 in

G - Width

N/A 2-15/16 in

H - Height

N/A 1 in

K - Outside Diameter

N/A 13/32 in

k - Inside Diameter

N/A 9/32 in

Number of Hold Down Bolt Holes

N/A 8

L - Diameter

N/A 2-7/16 in

M - Length

N/A 1/32 in

N - Depth of Hole

N/A 3/8 in

T - Hole

N/A 7/16-20UNF-2B

Lifting Holes - Threads

N/A NONE
Lifting Holes - BC. Diameter2 N/A NONE

Basic Model

N/A FL10U-2(Mod)

Weight

N/A 1.7 lb

Performance Specs

Fatique Life

N/A One Billion (109) Cycles

Bridge Resistance

N/A 350 Ohms (Nominal)

Excitation Voltage

N/A 15V AC or DC (Maximum)

Compensated Range

N/A 60 to 150 ºF

Temperature Effect on Bridge Balance

N/A ±0.0035%FS/°F

Temperature Effect on Output Signal

N/A ±0.0030%Load/°F (Nominal)

Non-Repeatability

N/A ±0.05%FS

Non-Linearity 

N/A ±0.25%FS

Hysteresis

N/A ±0.15% FS

Bridge Balance

N/A ±2%FS

Insulation Resistance

N/A 10000 Megaohms (Minimum)

Electrical Specifications

Receptacle

N/A PT02H-10-6P

Mating Plug

N/A PT06A-10-6S (SR)

     Function

N/A Pin

     (+) Excitation

N/A A

     (-) Excitation

N/A D

     (+) Signal

N/A B

     (-) Signal

N/A C

Cable

N/A #20(26x34) AWG., rubber insulation, shielded, rubber jacket, 4-Conductor (Standard Cable)

     Function 

N/A Wire Code

     (+) Excitation 

N/A Red

     (-) Excitation 

N/A Black

     (+) Signal 

N/A Green

     (-) Signal 

N/A White

General Information

N/A Strainsert has been designing and manufacturing precision Flat Load Cells® for nearly half a century. Strainsert has always been and continues to be a pioneer in the manufacturing of high quality precision load cells.
Outstanding Features

  • Precision Accuracies
  • Standard Capacities from 250 lbs. up to 2,000,000 lbs.
  • Low Profile, Rugged, Compact & Lightweight
  • Dual and Single Bridge Options
  • 2-mv/V or 3-mv/V Output (Nominal)
  • Low Deflection
  • High Frequency Dynamic Load Sensing
  • Pressure Compensating
  • Sealed Strain Gages
  • Counterbored Mounting Holes
  • Low Sensitivity to Extraneous Loads
  • High Static Overload
  • Highest Fatigue Rating in the Industry – One Billion Fully Reversed Cycles (Fatigue Rated Models)

    • 1 U/D: Uni-directional load rating, from zero to maximum specified. C/R: Completely reversed load rating, plus and minus specified.
    • 2 Bolt Circle Diameter