Request Information

Features

N/A

  • Low Profile, Rugged, Compact & Lightweight
  • Low Deflection
  • High Frequency Dynamic Load Sensing
  • Pressure Compensating
  • Sealed Strain Gages
  • Counterbored Mounting Holes
  • Low Sensitivity to Extraneous Loads
  • High Static Overload

Dimensional Drawing

Dimensional Drawing

 N/A
Metric Universal Load Cell
 a1044.jpg

Specifications

Load Capacity

 N/A 45 kN

Type of Flat Load Cells

 N/A Universal Metric

Rated Output

 N/A 2-mV/V (Nominal) 2-mV/V (Std. Output) 3-mV/V (Nominal) 3-mV/V (Std. Output)

Configuration

 N/A Dual Bridge Single Bridge

Non-Linearity

 N/A General Purpose ±0.25% F.S. Precision ±0.10% F.S.

Connector Type

 N/A Connector Permanently Attached Cable

Hole Type

 N/A Threaded Loading Hole Thru Hole

A - Diameter

 N/A 27.0 mm

B - Diameter

 N/A 46.0 mm

C - Diameter

 N/A 81.0 mm

D - Diameter

 N/A 85.7 mm

E - Length

 N/A 113 mm

F - Height

 N/A 23.8 mm

G - Width

 N/A 74.6 mm

H - Height

 N/A 25.4 mm

K - Outside Diameter

 N/A 10.32 mm

k - Inside Diameter

 N/A 7.14 mm

Number of Hold Down Bolt Holes

 N/A 8

L - Diameter

 N/A 61.9 mm

M - Length

 N/A 0.8 mm

N - Depth of Hole

 N/A 9.5 mm

T - Hole

 N/A 16.53 -0/+0.02 Thru Hole M16x1.5

Lifting Holes - Threads

 N/A NONE

Lifting Holes - BC. Diameter

 N/A NONE

Weight

 N/A 0.8 kg

Material of Construction

 N/A Alloy Steel

Performance Specs

Accuracy

 N/A  

     Non-Linearity

 N/A General Purpose ±0.25% FS Precision ±0.10% FS

     Hysteresis

 N/A General Purpose ±0.15% FS Precision ±0.10% FS

     Non-Repeatability

 N/A ±0.05% FS

Environmental

 N/A  

     Compensated Range

 N/A 60 to 150 ºF

     Effect on Zero

 N/A ±0.0035% FS/°F

     Effect on Output

 N/A ±0.0030% Load/°F (Nominal)

Electrical

 N/A  

     Excitation Voltage

 N/A 15V AC or DC (Maximum)

     Bridge Resistance

 N/A 350 Ohms (Nominal)
     Zero Balance1 N/A ±2% FS (Nominal)

     Insulation Resistance

 N/A 10,000 Megaohms (Minimum)

Mechanical

 N/A  

     Safe Static Overload without Zero Shift

 N/A 200%FS

     Safe Static Overload without Output Shift

 N/A 200%FS

     Safe Static Overload without Structural Failure

 N/A 250%FS

Electrical Specifications

Mating Plug

 N/A PT06A-10-6S (SR)

     Function

 N/A Pin

     (+) Excitation

 N/A A

     (-) Excitation

 N/A D

     (+) Signal

 N/A B

     (-) Signal

 N/A C

Cable

 N/A #20(26x34) AWG., rubber insulation, shielded, rubber jacket, 4-Conductor (Standard Cable)

     Function 

 N/A Wire Code

     (+) Excitation 

 N/A Red

     (-) Excitation 

 N/A Black

     (+) Signal 

 N/A Green

     (-) Signal 

 N/A White

General Information

N/A Load Cells are strain gage transducers developed by Strainsert (U.S. Patent No. 3,695,096). They are manufacured utilizing the internal strain gage process perfected by Strainsert since 1960. 

The structure is simple and compact, consisting of an inner loading hub and an outer supporting flange bridged smoothly by a uniformly continuous solid shear web avoiding structural stress risers.

Strain gages are installed and sealed inside small gage holes along the neutral axis of the web. Linearity and symmetry of output signal in tension and compression are obtained by equal straining of all shear gages in the bridge circuit.

Low deflection and high natural frequency are obtained, along with high resistance to extraneous forces. Mechanical and dynamic properties are fully tabulated.

  • 1 Prior to loading, it is necessary to initially/periodically null the zero load output to account for any residual offset.