Standard Internally Gaged Hex Head Cap Screws, SXS Series
Force Sensing Bolts & Studs
To measure accurate preload, service load and overload of bolted assemblies
For maximum uniformity, efficiency and reliability in bolted assemblies
For effective research, testing and manufacturing of bolted assemblies
To measure accurate preload, service load and overload of bolted assemblies
For maximum uniformity, efficiency and reliability in bolted assemblies
For effective research, testing and manufacturing of bolted assemblies
Item # |
Material |
Gages Type |
Gage Factor (Nominal) |
Non-Linearity |
Non-Repetition |
Excitation |
Output Signal (Nominal) |
Hardness |
Ultimate Tensile Strength |
Threads |
Thread Length |
Finish |
Series |
Configuration |
Bolt Thread Size |
Length |
Bridge Resistance (Nominal) |
Service Temperature |
Connector Type |
Temperature Compensation |
Calibration |
Signal Trim |
Mechanical Properties |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SXS | Material N/A Steel Alloy (SAE Grade 9), SAE 4140 or equivalent | Gages Type N/A Metal Foil | Gage Factor (Nominal) N/A 2.00 | Non-Linearity N/A ±1% of Allowable Load FS | Non-Repetition N/A ±0.1% FS |
Excitation
N/A 350-ohm (Standard) FB: 12V (Maximum) 350-ohm (Standard) QB: 6V (Maximum) 120-ohm FB: 3V (Maximum) |
Output Signal (Nominal)
N/A FB:3.5 to 4mV/V QB:1.3 to 1.5mV/V |
Hardness N/A Rockwell C38 to C42 | Ultimate Tensile Strength N/A 180,000 psi Minimum; (SAE Grade 9) | Threads N/A Class 2A, rolled | Thread Length N/A 2-diameters + 1/4 inch full threads + 3/16 inch maximum imperfect threads | Finish N/A Zinc Dichromate plated. Corrosion Protection per Federal Spec. QQ P-416 Type II, Class 3 | Series N/A SXS | Configuration N/A Full Bridge Strain Gage Circuit (Standard) Quarter Bridge Strain Gage Circuit | Bolt Thread Size N/A 1/2-13NC 1/2-20NF 1/4-20NC 1/4-28NF 1-1/2-12NC 1-1/2-6NC 1-1/4-12NF 1-1/4-7NC 1-1/8-12NF 1-1/8-7NC 1-12NF 1-8NC 3/4-10NC 3/4-16NF 3/8-16NC 3/8-24NF 5/16-18NC 5/16-24NF 5/8-11NC 5/8-181NF 7/16-14NC 7/16-20NF 7/8-14NCF 7/8-9NC 9/16-12NC 9/16-18NF | Length N/A | Bridge Resistance (Nominal) N/A 120 Ω 350 Ω (Standard) | Service Temperature N/A 150°F (Standard) 300°F (Max.) | Connector Type N/A Connector Header Style Permanently Attached Cable | Temperature Compensation N/A No Temperature Compensation to 150°F to 300°F | Calibration N/A Load & Unload Calibration Load Only Calibration (Standard) | Signal Trim N/A No Signal Trim Signal Trimmed to Specific Endpoint | Mechanical Properties N/A |
