Strainsert Custom Stud On Strainsert Co.

Many Uses and Applications

Measurement of Preload in Critical Assemblies
Inspection of Preload after Assembly, Shipping, Prior to Use
Provides Overload Detection Resulting from External Loading
Used as Measurement Tool During Actual / Simulated Service Conditions (Shock, Vibration, Gasket / Joint Relaxation, etc.)
Feedback to Control Systems
Provides for Direct Analysis of Components Under Investigation.

Superior Technical Features

Small installation holes allow for greater load carrying capability
Measurement Accuracy (<1% F.S., Typically.)
Gage Installations are Two Patterns in Series, 180° Apart in Small Holes (Minimizes Errors Due to Bending and Torque)
Quarter-Bridge and Full-Bridge Gage Installations with Ratings Up to 300° F Years of Experience Gaging Aircraft Quality Bolts and Many Other Types of Common and State of the Art Materials (MP 35N, Inconel, Monel, A286, Titanium, etc.)

To complete Stud Questionnaire please click the Request Information button, for Customer Supplied Studs.

1 - 1 of 1 | Results Per Page | View | Unit of Measure

Request Information

Item #	Quantity	Stud Geometry	Stud Diameter	Stud Length	Grip Length	Thread Length	Thread Designation	Stud Material	Ult. Tensile Strength	Yield Strength	Measurement Capacity	Height Restriction	Electrical Termination	Connector	Permanently Attached Cable	Header Termination	Electrical Specification	Gage Installation	Max. Operating Temperature	Special Options (available on a case by case basis)	Temperature Compensation	Signal Trim to common full scale output	Outgassing Restriction	General Information	Mechanical Properties

Strainsert Custom Stud	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A A286 Inconel 718 MP35N	N/A	N/A	N/A	N/A None	N/A	N/A 4-Pin (7/8" diameter and larger) Miniature	N/A	N/A Lead Wire < 3/8" diameter Tab Type ≥ 3/8" diameter	N/A	N/A 120Ω 350Ω (Standard) Full Bridge (Standard) Quarter Bridge	N/A 150°F 300°F[max)	N/A	N/A 150°F 300°F	N/A No Yes	N/A No Yes	N/A In addition, to our Strainsert Standard Hex Head, 12-Point Bolts, and Studs, Strainsert also manufactures many custom force sensing fasteners tailored for unique applications, installations, and special requirements. These may include customer provided fasteners, modifications to common fasteners, or new designs. The internally gaged bolts and studs (invented by Strainsert, U.S. Patent No. 2,873,341) are designed to accurately measure fastener tensile forces. Compression designs can also be provided. The instrumented fasteners allow direct, accurate, and repeatable force measurements from 1/4” diameter to over 4” diameter in all types of fasteners and materials.	N/A

1 - 1 of 1 | Results Per Page | View | Unit of Measure