Unit of Measure

Features

N/A

  • Low Profile, Rugged, Compact & Lightweight
  • Low Deflection
  • High Frequency Dynamic Load Sensing
  • Pressure Compensating
  • Sealed Strain Gages
  • Counterbored Mounting Holes
  • Low Sensitivity to Extraneous Loads
  • High Static Overload

Dimensional Drawing

Dimensional Drawing


Strainsert Compression Load Cell.jpg
a1044.jpg

Specifications

Load Capacity

500 lb

Type of Flat Load Cells

Compression

Rated Output

2-mV/V (Nominal) 2-mV/V (Std. Output)

Configuration

Single Bridge

Non-Linearity

General Purpose ±0.25% F.S. Precision ±0.15% F.S.

Connector Type

Connector Permanently Attached Cable

A - Diameter

9/16 in

B - Diameter

1-1/4 in

C - Diameter

2-1/2 in

D - Diameter

2-11/16 in

E - Length

3-23/32 in

F - Height

15/16 in

G - Width

2-13/16 in

H - Height

1-1/16 in

J - Length

1/16 in

K - Outside Diameter

7/32 in

k - Inside Diameter

1/8 in

Number of Hold Down Bolt Holes

4

L - Diameter

1-13/16 in

M - Length

1/32 in

N - Depth of Hole

1/8 in

Lifting Holes - Threads

NONE

Lifting Holes - BC. Diameter

NONE

Weight

0.6 lb

Material of Construction

Aluminium Alloy

Mechanical Properties


FL05C_MP

Performance Specs

Accuracy

 

     Non-Linearity

General Purpose ±0.25% FS Precision ±0.15% FS

     Hysteresis

General Purpose ±0.20% FS Precision ±0.15% FS

     Non-Repeatability

±0.05% FS

Environmental

 

     Compensated Range

60 to 150 ºF

     Effect on Zero

±0.0035% FS/°F

     Effect on Output

±0.0030% Load/°F (Nominal)

Electrical

 

     Excitation Voltage

15V AC or DC (Maximum)

     Bridge Resistance

350 Ohms (Nominal)
     Zero Balance1 ±2% FS (Nominal)

     Insulation Resistance

10,000 Megaohms (Minimum)

Mechanical

 

     Safe Static Overload without Zero Shift

200%FS

     Safe Static Overload without Output Shift

200%FS

     Safe Static Overload without Structural Failure

250%FS

Electrical Specifications

Receptacle

PT02H-10-6P

Mating Plug

PT06A-10-6S (SR)

     Function

Pin

     (+) Excitation

A

     (-) Excitation

D
     (+) Signal2 B
     (-) Signal3 C

Cable

#20(26x34) AWG., rubber insulation, shielded, rubber jacket, 4-Conductor (Standard Cable)

     Function 

Wire Code

     (+) Excitation 

Red

     (-) Excitation 

Black
     (+) Signal 4 Green
     (-) Signal 5 White

General Information

N/A Load Cells are strain gage transducers developed by Strainsert (U.S. Patent No. 3,695,096). They are manufacured utilizing the internal strain gage process perfected by Strainsert since 1960. 

The structure is simple and compact, consisting of an inner loading hub and an outer supporting flange bridged smoothly by a uniformly continuous solid shear web avoiding structural stress risers.

Strain gages are installed and sealed inside small gage holes along the neutral axis of the web. Linearity and symmetry of output signal is obtained by equal straining of all shear gages in the bridge circuit.

Low deflection and high natural frequency are obtained, along with high resistance to extraneous forces. Mechanical and dynamic properties are fully tabulated.

  • 1 Prior to loading, it is necessary to initially/periodically null the zero load output to account for any residual offset.
  • 2 The signal leads are reversed.
  • 3 The signal leads are reversed.
  • 4 The signal leads are reversed.
  • 5 The signal leads are reversed.