Request Information
The Strainsert 2-wire Loop Powered 4 to 20 mA Strain Gage Modules are specially designed compact, high performance strain gage analog signal conditioner modules. They are aimed at 350 Ohm sensor applications which require high measurement accuracy, resolution, and stability. The internal signal conditioner reduces interference in noisy environments and allows for longer cable runs. The module and sensor may be powered by a typical DC power supply. Outputs may be configured for either UniPolar or Bi-Polar operation.

The modules may be mounted inside of the Strainsert sensor body in either a single bridge, dual bridge, or biaxial configuration.

Contact Strainsert Engineering for assistance with custom solutions, systems integration, or software development.
Unit of Measure

Features & Benefits

N/A Converts Bridge sensor output into 4 to 20 mA current loop.
Eliminates the need for external signal conditioner and interconnections.
Miniature package that fits into sensor body.
Ideal for single or multiple sensor systems.

Applications

N/A Aerospace
Industrial Weighing
Marine
Automotive

Specifications

Current Loop Supply

 N/A Min: 7.5 Volts
Typical: 24 Volts
Max: 36 Volts

Reverse Voltage Protection

 N/A Min: -100 Volts

Operating Current

 N/A Min: 3 mA
Typical: 4-20 mA
Max: 28 mA

Operating Temperature

 N/A Min: -40 °F
Max: 185 °F

Storage Temperature

 N/A Min: -67°F
Max: 257°F

Bridge Resistance

 N/A Typical: 350 Ohns

Bridge Excitation

 N/A Min: .730 Volts
Typical: .733 Volts
Max: .740 Volts

Bridge Sensitivity

 N/A Min: 0.5 mV/V
Typical: 2.0 mV/V
Max: 6.0 mV/V

Bandwidth

 N/A Min: 0 Hz
Max: 235 Hz

Zero-Scale Temperature Stability

 N/A Max: 0.0100 %FS/°F

Full-Scale Temperature Stability

 N/A Max: 0.0150 %FS/°F

Electrical Isolation

 N/A Min: 10^10 Ohms at 50 VDC


Standard Cable Connection