Request Information
Unit of Measure

Features

N/A

  • Low Profile, Rugged, Compact & Lightweight
  • Low Deflection
  • High Frequency Dynamic Load Sensing
  • Pressure Compensating
  • Sealed Strain Gages
  • Counterbored Mounting Holes
  • Low Sensitivity to Extraneous Loads
  • High Static Overload
  • Highest Fatigue Rating in the Industry –One Billion Fully Reversed Cycles (Fatigue Rated Models)

Dimensional Drawing

Dimensional Drawing

 N/A
Fatigue Rated Load Cell
 a1044.jpg

Specifications

Load Capacity1 N/A ±66, C/R KIPS99, U/D KIPS

Type of Flat Load Cells

 N/A Fatigue Rated

Rated Output

 N/A 2-mV/V C/R (Nominal) 2-mV/V C/R (Std. Output) 3-mV/V U/D (Nominal) 3-mV/V U/D (Std. Output)

Configuration

 N/A Dual Bridge Single Bridge

Non-Linearity

 N/A General Purpose ±0.25% F.S. Precision ±0.10% F.S.

Connector Type

 N/A Connector Permanently Attached Cable

Hole Type

 N/A Threaded Loading Hole Thru Hole

A - Diameter

 N/A 4-3/8 in

B - Diameter

 N/A 7 in

C - Diameter

 N/A 10-3/4 in

D - Diameter

 N/A 11-1/8 in

E - Length

 N/A 12-11/16 in

F - Height

 N/A 1-1/2 in

G - Width

 N/A 3-3/4 in

H - Height

 N/A 3-1/2 in

K - Outside Diameter

 N/A 1-3/16 in

k - Inside Diameter

 N/A 13/16 in

Number of Hold Down Bolt Holes

 N/A 16

L - Diameter

 N/A 8-3/4 in

M - Length

 N/A 9/16 in

N - Depth of Hole

 N/A 1-1/8 in

T - Hole

 N/A 2-3/8-12N-2B Thru Hole, 2-13/32"

Lifting Holes - Threads

 N/A 3/8-16 UNC
Lifting Holes - BC. Diameter2 N/A 3-1/8

Basic Model

 N/A FL150U-2

Weight

 N/A 59.5 lb

Performance Specs

Fatique Life

 N/A One Billion (109) Cycles

Bridge Resistance

 N/A 350 Ohms (Nominal)

Excitation Voltage

 N/A 15V AC or DC (Maximum)

Compensated Range

 N/A 60 to 150 ºF

Temperature Effect on Bridge Balance

 N/A ±0.0035% FS/°F

Temperature Effect on Output Signal

 N/A ±0.0030% Load/°F (Nominal)

Non-Repeatability

 N/A ±0.05% FS

Non-Linearity 

 N/A ±0.25% FS

Hysteresis

 N/A ±0.15% FS

Bridge Balance

 N/A ±2% FS

Insulation Resistance

 N/A 10,000 Megaohms (Minimum)

Electrical Specifications

Receptacle

 N/A PT02H-10-6P

Mating Plug

 N/A PT06A-10-6S (SR)

     Function

 N/A Pin

     (+) Excitation

 N/A A

     (-) Excitation

 N/A D

     (+) Signal

 N/A B

     (-) Signal

 N/A C

Cable

 N/A #20(26x34) AWG., rubber insulation, shielded, rubber jacket, 4-Conductor (Standard Cable)

     Function 

 N/A Wire Code

     (+) Excitation 

 N/A Red

     (-) Excitation 

 N/A Black

     (+) Signal 

 N/A Green

     (-) Signal 

 N/A White

General Information

N/A Load Cells are strain gage transducers developed by Strainsert (U.S. Patent No. 3,695,096). They are manufacured utilizing the internal strain gage process perfected by Strainsert since 1960. 

The structure is simple and compact, consisting of an inner loading hub and an outer supporting flange bridged smoothly by a uniformly continuous solid shear web avoiding structural stress risers.

Strain gages are installed and sealed inside small gage holes along the neutral axis of the web. Linearity and symmetry of output signal in tension and compression are obtained by equal straining of all shear gages in the bridge circuit.

Low deflection and high natural frequency are obtained, along with high resistance to extraneous forces. Mechanical and dynamic properties are fully tabulated.

  • 1 U/D: Uni-directional load rating, from zero to maximum specified. C/R: Completely reversed load rating, plus and minus specified.
  • 2 Bolt Circle Diameter