Request Information
Unit of Measure

Features

N/A The Model SCD1 is a series of signal conditioners which provide bridge excitation, amplification, span and balance controls and a choice of ±10 Vdc and/or 4-20 ma outputs. Primary input power is available in 120 Vac or a variety of Vdc voltage levels.

The SCD1 can accommodate up to four channels with ±10 Vdc outputs or a maximum of 2 channels with 4-20 ma outputs.

Standard SCD1 models are packaged in a NEMA-12 rated cabinet (NEMA-4X packages are available).

Each input channel is connected via a six (6) pin receptacle (PT02A-10-6S)

All output signals are provided at a terminal strip inside the signal conditioner cabinet . Each output signal has an individual terminal connection and each signal shares a single common return.

Note: When ordering specify input sensitivity, and desired full scale output.

Specifications

Dimensional Drawing

 N/A
Signal Conditioner
 a1054.jpg

Channel

 N/A Four Channel Input / Output

Output

 N/A ± 10 Vdc

Power Supply Voltage

 N/A 120 Vac

Sensitivity

 N/A 0.5-mv/V (minimum)

Excitation

 N/A  

     Output Voltage

 N/A 5 VDC (±0.2%)

     Output Current

 N/A 100 mA (maximum)

     Regulation

 N/A 0.05% Line 0.05% Load

Temp. Coefficient

 N/A 0.002% F.S. / Deg. F

Input

 N/A  

     Bridge Type

 N/A 120 Ohm 350 Ohm

     Sensitivity (minimum)

 N/A 0.5-mv/V (minimum)

Voltage Amplifier

 N/A  

     Input Impedance

 N/A > 1 Megohm

     Output Impedance

 N/A < 0.1 Ohms

Gain

 N/A  

     Adjustment

 N/A ± 5% F.S.

     Stability

 N/A ± 0.002% F.S. / Deg. F

     Linearity

 N/A ± 0.02% F.S.

Zero

 N/A  

     Adjustment 

 N/A ± 10% F.S.

     Stability 

 N/A ± 0.006% F.S. / Deg. F

     Source Current

 N/A ± 7.5 ma

Output 

 N/A  

     Voltage Output

 N/A ± 10 Vdc at 7.5 ma

     Current Output (4-20 ma Units Only)

 N/A 4-20ma (500 Ohm Load Max.)

     Protection

 N/A Voltage Output protected against continuous short to ground. Current Output protected against continuous short to common and + Vcc

Dynamic Response

 N/A  

     Filter

 N/A 5 Hz, 40 dB/Octave, L.P. Butterworth

     Settling Time

 N/A < 500us to within ±0.1% of the final value

     Slew Rate

 N/A 0.55V/us

Power Input

 N/A  

     AC Power (AC Units ONLY)

 N/A 105 to 125 Vac

     Frequency

N/A 50 to 440 Hz

Dimensions

 N/A 6” (H) x 6” (W) x 4” (D)

Environmental

 N/A  

     Operating Temp

 N/A -10 to 150 °F

     Storage Temp

 N/A -65 to 200 °F